Hi ya,
If you are wondering how you can add
two IP address in one NIC card, you have come to the right place. Please follow the following step below.
1. Open up your Network connection
You can do this by open Run (Windows +
R )
Type in the following
NCPA.CPL
2. Double click required Port –
Ethernet if you are using LAN or Wi-Fi if you are using Wireless.
3. Select the Internet Protocol Version 4 (TCP/IPv4) , Click properties
4. Make sure you untick obtain an IP address automatically and
select the Use the following IP address
5. Fill in the Primary IP address, subnet mask, defaultgate , Preferred DNS server and
Alternate DNS server details.
6. Then Click on Advance... and click
on Add
7. Fill up the box with the secondary
IP address and subnet you desire.
Good luck !!!
No comments:
Post a Comment